UPS LEGRAND DAKER PLUS 6000 VA – 6000 W IEC 310174

LEGRAND PN: 310174DAKER DK UPS PLUS IS A SINGLE PHASE UNINTERRUPTIBLE POWER SUPPLY WITH HIGH FREQUENCY PWM TECHNOLOGY, DOUBLE CONVERSION ONLINE. IT DELIVERS A RATED POWER OF 6000VA / 6000W, EQUIPPED WITH VALVE-REGULATED, HERMETICALLY-SEALED ACCUMULATOR BATTERIES, CONTAINED IN A SPECIFIC COMPARTMENT INSIDE THE UPS OR IN ONE OR MORE EXTERNAL CABINETS. WITH THE REVERSIBLE SCREEN, THE DAKER DK PLUS UPS CAN BE USED IN BOTH TOWER AND 19” RACK CONFIGURATION. NOMINAL POWER: : 6000 VA, ACTIVE POWER: : 6000 W, BACKUP TIME: : 5 MIN. WEIGHT: : 60 KG. DAKER DK PLUS – ON-LINE DOUBLE CONVERSION UPS (RACK/TOWER) – SINGLE PHASE AND THREE PHASE VFI. THE MAIN PARAMETERS OF THE UPS, INCLUDING THE BATTERY CHARGE LEVEL AND FAULTS, ARE DISPLAYED ON THE LCD SCREEN ON THE FRONT PANEL. THE INTEGRATED COMMUNICATION SOFTWARE NOT ONLY CONTROLS THE UPS AND ITS SWITCH-OFF IF THERE IS A MALFUNCTION, AND ENABLES THE USER TO TEST THE MAIN FUNCTIONS REMOTELY, COMMUNICATE VIA SNMP/INTERNET/NETWORK ADAPTOR AND ACCESS THE FUNCTIONS OF THE UPS VIA THE INTERNET, BUT CAN ALSO SEND THE USER AN SMS IF SPECIFIC EVENTS OCCUR. THE INTERNAL EXTENSION CONNECTOR ENABLES AWEB/SNMP CARD OR A RELAY INTERFACE TO BE INSTALLED WHICH PROVIDES INSULATED CONTACTS FOR APPLICATIONS ON INDUSTRIAL CONTROL PANELS OR REMOTE ALARM PANELS. IF THERE IS AN ELECTRONIC FAULT, OVERLOAD, OVERHEATING OR FOR SCHEDULED MAINTENANCE OPERATIONS, THE AUTOMATIC OR MANUAL (OPTIONAL) BYPASS ENSURES CONTINUITY OF THE POWER SUPPLY FOR CRITICAL LOADS. A BYPASS SWITCH IS AVAILABLE FOR MAINTENANCESPECIFICATION : 1. USB PORT, 2. RS-232 PORT, 3. CAN BUS CONNECTION PORTS FOR PARALLEL SYSTEM, 4. EMERGENCY POWER OFF (EPO), 5. COOLING FANS, 6. INPUT/OUTPUT TERMINAL STRIP, 7. SNMP SLOT, 8. EXTERNAL BATTERY CONNECTOR, 9. UTILITY INPUT BREAKER, 10. BYPASS INPUT BREAKER, 11. IEC 16A OUTPUT CIRCUIT BREAKERS, 12. IEC 16A OUTLETS – C19 X 2 PCS, 13. IEC 10A OUTPUT CIRCUIT BREAKERS, 14. IEC 10A OUTLETS – IEC C13 X 8 PCS